Note:
1. Important reminder: WS2812B must work with a 5V LED power supply. Exceeding DC5.5V will burn out the LED strip.
2. Common problem: The light strip cannot be fully lit. This is not a problem with the light strip, but you need to set the controller to light up more beads. For example, if you set to light up 100 beads, it will only light up 100 beads; if you set to light up 300 beads, it will only light up 300 beads.
3. The 0.5-meter-long LED strip is very common in electronic products and is not a quality problem. If you mind this, please do not place an order!
4. This link does not include a power supply, please be aware.

Product Description:
1. Includes a 3-pin JST connector: Red: VCC, White: GND, Green: DATA.
2. There is 3M adhesive tape on the back of the light strip (except for the IP67 model). The installation surface must be smooth, clean and dry.
3. The light strip can be cut between each LED to create a custom length.
4. Do not bend the light strip too sharply.
5. Longer circuits should be powered at both ends to reduce voltage drop.
6. The 3-pin JST connector wire is 20AWG.

Product Applications:
WS2812B dreamy color light strips can be used in TV hotels, KTVs, bars, game rooms and other leisure and entertainment decorations to create an atmosphere, as well as for car chassis, car decorations, shop decorations, home decorations and other decorations.

Product Details:
Input Voltage: DC5V
Power: 60 LEDs/m ---- 18W/m
LED Resource: WS2812B LED
LED: Each bead can be controlled individually
IC Type: Improved WS2812 IC
IC Description: 1 IC drives 1 LED chip
Gray Scale Level: 256
Bits per Color: 8-Bits/Color
FPC Width: 60 LEDs/m —— 10mm
FPC Color: Black/White
Protection Level: IP30/IP65/IP67
Color: Full-color RGB, dreamy color changing
Cuttable: Each LED can be cut
Packaging: Packaged in anti-static bags, IP30/IP65 versions have 3M tape on the back (IP67 version has no 3M tape)

Included in the Package:
Light Strip Set
1*1m/2m/3m/4m/5m light strip
1*28-key USBLED controller (battery not included)